This is what you should have received from us

Sagecomm 2864 (1x)

One part power cable for Sagecomm 2864 (1x)

Mediatrix 2102 (1x)

Two part power cable for Mediatrix 2102 24v (1x)

RJ11 telephone cable (1x)

5 feet RJ45 network cable (1x)

3 feet RJ45 network cable (1x)
Additional equipment you will need

PC (1x)

5 feet RJ45 network cable (1x)

Telephone (1x)

RJ11 telephone cable (1x)
How to proceed
Step 1
Connect the telephone cable RJ11 in the LINE port of the wall socket and into the DSL port of the modem.
* Important: The model of your LINE port may vary. The port may not look like the picture shown below.
* Don't connect the Mediatrix and the modem right away.



Step 2
Plug a RJ45 network cable into the LAN1 port of your modem and into the Network port of your Mediatrix.



Step 3
Plug a RJ45 network cable into the Computer port of your Mediatrix and into the Ethernet port of your PC.



Step 4
Plug your phone into the Phone / Fax # 1 port of your Mediatrix with a RJ11 telephone cable. The Phone / Fax # 2 port is not functional.



Step 5
Plug your DSL modem, it will start automatically. After, wait until the @ light is visible and stable before the the next step.



Step 6
Plug your Mediatrix, it will start automatically. After, wait until the Ready light is flashing before the next step..



Step 7
Configure your PC.
When you are asked to choose between PPPoE and DHCP, choose DHCP.
Use the DNS server addresses on this reference page as needed to complete the information required to complete your router configuration.
After completing the configuration of your PC, it should be restarted.
When you are asked to choose between PPPoE and DHCP, choose DHCP.
Use the DNS server addresses on this reference page as needed to complete the information required to complete your router configuration.
After completing the configuration of your PC, it should be restarted.

Step 8
Please test your Internet access on your PC. The easiest way is to open a browser and visit the page of a search engine.

Step 9
Congratulations. You have completed the installation of your service. Thank you for choosing B2B2C.
Don't forget to activate your access to the Subscriber Area.
This page How can I access the Subscriber Area will help you do that.
Don't forget to activate your access to the Subscriber Area.
This page How can I access the Subscriber Area will help you do that.
Complementary information
The LAN2, LAN3, and LAN 4 ports of your modem are not functional.
Use the ports on your modem or the WiFi network it generates to provide access to your equipment, computer, mobile, TV or other.