Here is your installation guide

This guide is because you have selected the following configuration:

Please return to the Installation Guides page if you think you have not selected the right components.

This guide is divided into three parts:
  1. Inventory of what you should have received from us
  2. Additional equipment you will need.
  3. Step-by-step instructions.

This is what you should have received from us

Sagecomm 2864 (1x)
One part power cable for Sagecomm 2864 (1x)
RJ11 telephone cable (1x)
5 feet RJ45 network cable (1x)

Additional equipment you will need

Wifi router (1x)

How to proceed

Step 1

Plug the telephone cable RJ11 in the LINE port of the wall socket and into the DSL port of the modem.


Step 2

Plug a 5 feet RJ45 network cable into the LAN1 port of your modem and into your router's Ethernet port.

Step 3

Plug your DSL modem and wait until the @ light is visible and stable.


Step 4

Plug your PPPoe router with the information provided to you when you receive the equipment from us. Restart the router after configuration.

Step 5

Please test your Internet access. You don't have to change your device's configuration to detect the Internet automatically.

Step 6

Congratulations. You have completed the installation of your service. Thank you for choosing B2B2C. Don't forget to activate your access to the Subscriber Area and consult our FAQ.

Complementary information

The LAN2, LAN3, and LAN 4 modem ports are not functional. You can only use the LAN1 port.